Barkim Grotek Ceramic Adhesive

Barkim Grotek Ceramic Adhesive

DESCRIPTION

Cement-based, polymer-added, high adhesion strength used for adhering granite, granite ceramic, large-sized natural and artificial stones on horizontal and vertical surfaces. It is an easy mortar to prepare.

Açıklama

PROPERTIES

Contains special cements, synthetic additives, mineral fillers, water-repellent agents

Resistant to water and frost

Unaffected by temperature differences

Long processing time

Does not sag n
It does not contain asbestos

It adheres easily to the surface

APPLICATION

A. PREPARATION

The surface must be clean, free from factors such as dust, dirt and oil that prevent adhesion, and cracks must be filled. n
B.APPLICATION

25kg Grotek Granite Ceramic Adhesive should be poured into 6-7 liters of clean water slowly and mixed with a low speed mixer until no lumps and air bubbles remain and the mortar should be rested for 5 minutes. The prepared mortar is applied to the surface, combed and ceramic bonding is done. Application thickness 3-8 mm. should be between Grouting application should be started after 24 hours.

PACKAGING
25 kg kraft bags

CONSUMPTION
Average 4-4.5 kg/m²

n
STORAGE
Up to 8 floors in a dry and cool environment It is about 6 months in its unopened original package.

SAFETY PRECAUTIONS
Direct contact with the skin should be avoided and consumable amount of material should be prepared. Adding water to the material that has reached the point of exceeding the working time will damage the material. It should be protected from precipitation, frost and extreme heat for 24 hours in applications to be made outdoors.

Go to Top